Camera property enum can be used for getting and setting camera properties.
Enumerator |
---|
None |
No property.
|
InternalModelName |
The name the hardware reports as its own.
|
InternalSerialNr |
The internal serial nr. of the hardware.
|
VersionFirmware |
The firmware version of the hardware.
|
RaytrixModelName |
Get the Raytrix camera model name.
|
RaytrixSerial |
Get the Raytrix camera model name.
|
Temperature |
Property for getting temperature of camera.
|
DriverName |
Raytrix camera type name. E.g. 'TypeD' or 'TypeE'.
|
HardwareId |
Unique hardware ID.
|
IsInitialized |
The Camera is initialized.
|
IsConnected |
The Camera is connected.
|
IsOpen |
The Camera is opened.
|
IsCapturing |
The Camera is capturing.
|
IsColor |
The Camera is a color camera.
|
IsBayer |
The Camera is a bayer camera.
|
TriggerMode |
Property for getting and setting the video mode. The supported modes are listed in Rx::Interop::Runtime30::Canera::EriggerMode.
|
IsSuspended |
The Camera is suspended.
|
Exposure |
Property for getting and setting exposure of camera.
|
Framerate |
Property for getting and setting frame rate of camera.
|
ActualFramerate |
Property for getting current acquisition frame rate.
|
PixelClock |
Property for getting and setting PixelClock for IDS Cameras.
|
VideoBufCnt |
Property for getting and setting the number of video buffers.
|
Gain |
Property for getting and setting global gain value of camera.
|
GainRed |
Property for getting and setting red gain value of camera.
|
GainGreen |
Property for getting and setting green gain value of camera.
|
GainBlue |
Property for getting and setting blue gain value of camera.
|
TapBalance |
Property for getting and setting TapBalance.
|
TapBalanceMode |
Property for getting and setting TapBalanceMode.
|
OffsetX |
Property for getting and setting x offset of image. This is the x coordinate on sensor where the image starts.
|
OffsetY |
Property for getting and setting y offset of image. This is the y coordinate on sensor where the image starts.
|
Width |
Property for getting and setting image width. This is the width of acquisition image, not of image sensor.
|
Height |
Property for getting and setting image height. This is the height of acquisition image, not of image sensor.
|
Bitdepth |
Property for getting and setting the bit depth of the acquisition image.
|
AutoLuminanceMode |
Property for getting and setting auto luminance mode of camera.
|
AutoExposureMode |
Property for getting and setting auto exposure mode of camera.
|
AutoGainMode |
Property for getting and setting auto gain mode of camera.
|
HasMainLensControl |
Property for getting availability of a software controllable main lens.
|
Focus |
Property for getting and setting Focus.
|
Iris |
Property for getting and setting Iris.
|
IrisFValue |
Property for getting and setting IrisValue.
|
PIVMode |
Property for getting and setting PIV mode. [unsigned] [0,1].
|
TapGeometry |
Property for getting and setting the board topology.
|
GrabberBoardID |
DEPRICATED: The identifier of the grabber board.
|
GrabberPortIdString |
A string representing the camera link port ID of the grabber or the camera link camera. Example: "EURESYS#Euresys Grablink Full#0".
|
SourceImageFolder |
The current source image folder of the virtual camera.
|
ImageFileReadMode |
Read mode of image files of the virtual camera.
|
ExternalTriggerMode |
Mode of the external trigger. The supported modes are listed in Rx::Interop::Runtime30::Canera::EExternalTriggerMode.
|
HasIPConfig |
|
GlobalStart |
|
StrobeOn |
|
StrobeLength1 |
|
StrobeLength2 |
|
StrobeDelay1 |
|
StrobeDelay2 |
|
BinningMode |
|
FrameGrabberStrobeOn |
Enable (1) or disable (0) the strobe output channel of the frame grabber. Only available in external trigger mode (unsigned,[0,1],RW).
|
FrameGrabberStrobeLength |
The length of the strobe signal given in percentage of the camera exposure time. A value of 50 % means that the duration of the strobe pulse is half the duration of the exposure period. (unsigned,[0,100],RW).
|
FrameGrabberStrobePosition |
The position of the strobe signal given in percentage of the strobe length. A value of 0 % establishes the earliest position. A value of 100 % establishes the latest position. A value of 50 % means that the strobe pulse is located in the middle of the exposure period. This parameter refers to the middle of the strobe pulse (unsigned,[0,100],RW).
|